Skip to content

Roadmap

Hybrid system diagram — what a productionized inverter could look like
An earlier exploration of a productionized topology including LC filtering and closed-loop control. The roadmap items below describe what would actually be needed to get there from the as-built single-phase open-loop bench prototype.

Future work — what we'd pick up after the graduation deliverable, in roughly the order we'd recommend tackling it. Drawn from Build Guide v4.0 §15.

Tracks

Track One-liner
PSC tuning Already implemented — this page covers further tuning beyond what was demonstrated.
LC filter A staged LC filter on the inverter output to drop THD further before any load.
Closed-loop control Output-voltage feedback into the modulator — currently open-loop.
Grid tie Synchronization, anti-islanding, and the safety implications of grid coupling.
Thermal enclosure The boards are bench-thermally-balanced; an enclosed deployment needs forced air or a heatsink redesign.
Product path What turning the project from a graduation deliverable into a product would actually take.

The experimental tracks (RISC-V SoC, FPGA controller) are deliberately not in this list — they have no validated path to the as-built hardware.