Schematic¶
The schematic source is a hierarchical KiCad project rooted at CHB_INVERTER.kicad_sch. It decomposes into seven sheets — each captures one logical block of the single-bridge module.
Hierarchical decomposition¶
flowchart TB
TOP[CHB_INVERTER.kicad_sch
top level]
TD[TOPDESIGN.kicad_sch
module integration]
HS[Highside_cell.kicad_sch
2× HS MOSFET + driver]
LS[Lowside_cell.kicad_sch
2× LS MOSFET + driver]
DR[driver_cell.kicad_sch
TLP250 wiring]
PSU[5v-15v_sch.kicad_sch
isolated gate-drive rail]
VS[Voltage_sensing_sch.kicad_sch
DC bus divider + MCP3201]
CS[current_sensing_sch.kicad_sch
ACS712 + MCP3201]
TOP --> TD
TD --> HS
TD --> LS
HS --> DR
LS --> DR
TD --> PSU
TD --> VS
TD --> CS
Block-level summaries¶
These small block diagrams were authored by the team during the schematic design phase and are kept as design-intent references.
How to open the schematic¶
# From the repo root in PowerShell:
& "C:\Program Files\KiCad\9.0\bin\kicad.exe" hardware/single-bridge-v4/kicad/CHB_INVERTER.kicad_pro
The project was authored in KiCad 9 (April 2026). Older versions may produce schema-version warnings on open — usually harmless, but the project was last saved with v9 nightly features (generator_version 9).
Export to PDF¶
The PDF schematic export is regenerable from the KiCad CLI:
kicad-cli sch export pdf `
--output docs/assets/pdfs/CHB_INVERTER_schematic.pdf `
hardware/single-bridge-v4/kicad/CHB_INVERTER.kicad_sch
(Once generated, this PDF can be linked from this page for offline review. The team has not yet exported a final PDF; the editable schematic remains canonical.)
Source files¶
| File | Bytes | Role |
|---|---|---|
CHB_INVERTER.kicad_pro |
16 K | Project metadata + library settings |
CHB_INVERTER.kicad_sch |
100 K | Top-level schematic |
TOPDESIGN.kicad_sch |
86 K | Module integration sheet |
Highside_cell.kicad_sch |
52 K | High-side MOSFET pair + drivers |
Lowside_cell.kicad_sch |
43 K | Low-side MOSFET pair + drivers |
driver_cell.kicad_sch |
34 K | TLP250 wiring, gate resistor, GS pull-down |
5v-15v_sch.kicad_sch |
28 K | B0515S isolated 5 V → 15 V DC-DC + filter |
Voltage_sensing_sch.kicad_sch |
79 K | DC bus divider → MCP3201 → 6N137 isolation |
current_sensing_sch.kicad_sch |
27 K | ACS712 → MCP3201 → 6N137 isolation |






