Skip to content

Dashboard

Lab testing setup — the dashboard running live alongside the bench rig
The PySide6 operator dashboard running on the bench PC during a live PSC session. The dashboard handles every command the firmware supports plus 20 Hz telemetry visualization, fault display, and replay-log capture.

The PySide6 operator dashboard that talks to the STM32 over UART.

Page What it covers
Overview Architecture, modules, the data model, safety design.
Installation py -3.11 -m venv … setup, pinned versions, troubleshooting.
Operator workflow A typical session — bring up, configure, arm, run, stop, recover.

Source: firmware/stm32-f303re/dashboard/ (imported via subtree in Phase 2).

The dashboard's own README is in the source tree at firmware/stm32-f303re/dashboard/README.md.